Platform · Hardware simulation and testing
Board bring-up and validation, without the spreadsheet
Bring up a board, sweep it across its operating range and validate it against the spec, on the supplies, loads and scopes you already have. Start on a simulated bench, then go live.
What you can validate
m8rix for hardware simulation and testing
- Bring-up and soft-startRails brought up in order with current limits, each checked before the next.
- Efficiency and ripple sweepsAcross line and load, with the numbers from the raw samples.
- Wiring checked before a live runEach connection ticked against the drawing first.
- Simulated bench or real instrumentsThe same plan on simulated instruments, then on yours.
Workflows
Say what to test. It runs the rest.
Each workflow starts with a sentence. The agent turns it into a plan you review, then runs it on your bench.
01
Converter bring-up
Soft-start, regulation, efficiency and ripple in one run.
> Bring up the buck board and sweep the load from 0.5 A to 4 A.
02
Overnight validation
The full plan queued to run unattended.
> Queue the full validation to run tonight.
03
Fault response
Short and overload tests with the protections timed.
> Check the overcurrent protection trips within 10 µs.
Why m8rix
Built for hardware that has to work
Limits it cannot cross
Your device's ratings are hard limits, checked on every step by deterministic code. The AI can't loosen them.
Every run on the record
Every command, who asked for it and the result, with the data and waveforms kept for review.
Works with your bench
725 instrument models from 9 makers already known, and a driver for anything else with SCPI.
On this bench
- Power supplies335
- Electronic loads11
- Oscilloscopes171
- Multimeters6
- Power analyzers and DAQ3
- and anything else with SCPI
Every layer
See it run on your own bench
Free for Mac and Windows. Start on a simulated bench, then connect your instruments.