Solutions · Research labs

Experiments you can repeat, on benches you share

University and industrial research labs run characterisation on shared instruments, often by many people. m8rix makes each experiment a plan anyone can rerun, with every result kept.

Book a demoDownload

What you can validate

m8rix for research labs

  • Device characterisationI-V curves, sweeps across temperature or bias, and metrics from the raw samples.
  • Prototype bring-upNew boards and circuits brought up safely, with limits set from the device's ratings.
  • Repeatable experimentsThe plan is saved, so the same experiment can run again next week or in another lab.
  • New instrumentsA driver written from the programming manual and proven on the instrument before first use.
01Describe the experiment02Run the sweep03Keep the data

Workflows

Say what to test. It runs the rest.

Each workflow starts with a sentence. The agent turns it into a plan you review, then runs it on your bench.

01

I-V characterisation

Sweep with a source meter, capture current and voltage, fit and plot.

> Take an I-V curve of the diode from -1 V to 0.8 V in 10 mV steps.

02

Parameter sweep

Nested sweeps across two parameters, with a measurement at every point.

> Sweep bias from 1 to 5 V and frequency from 1 to 100 kHz and measure gain.

03

Driver for a new instrument

Point it at the manual; it writes the driver, tests it on the instrument and adds it to the bench.

> Add a driver for the new lock-in amplifier from its programming manual.

Why m8rix

Built for hardware that has to work

Limits it cannot cross

Your device's ratings are hard limits, checked on every step by deterministic code. The AI can't loosen them.

Every run on the record

Every command, who asked for it and the result, with the data and waveforms kept for review.

No scripts to maintain

Describe the experiment in a sentence instead of writing and keeping up a script.

On this bench

  • Source meters47
  • Power supplies335
  • Oscilloscopes171
  • Signal generators97
  • Multimeters6
  • and anything else with SCPI

Other solutions

Space and satellitesPower, payload and flight boards, qualified before launchLaunch vehiclesAvionics, engine controllers and flight-computer HILEV and automotiveBMS, chargers, inverters and ECU firmwareDefenceRuggedised power and RF, tested to spec, on your own machinesRoboticsMotor drives, servo loops, sensors and battery packsSemiconductorsSilicon bring-up and characterisation across cornersEnergySolar inverters, storage and PV simulationElectronics productionEnd-of-line and production test, run the same every time

See it run on your own bench

Free for Mac and Windows. Start on a simulated bench, then connect your instruments.

Download for MacDownload for Windows
Book a demo