Solutions · Defence

Test to the spec, and prove it

Defence electronics are tested against demanding specifications, and the evidence matters as much as the result. m8rix runs on your own machines and records every command and reading.

What you can validate

m8rix for defence

  • Ruggedised power suppliesRegulation, hold-up and transient response across the input range the spec calls for.
  • RF front endsGain, spectrum and response with signal generators, spectrum and network analyzers.
  • Acceptance test proceduresYour ATP as a plan: every step, setpoint and limit, run the same way for every unit.
  • Evidence you can hand overEach verdict with the readings behind it, and the full log of what ran.
01Write the ATP02Run per unit03Evidence pack

Workflows

Say what to test. It runs the rest.

Each workflow starts with a sentence. The agent turns it into a plan you review, then runs it on your bench.

01

Acceptance run

The ATP runs step by step on each serial number, with a pass or fail against every limit.

> Run the acceptance test on unit 0042 and report every limit.

02

RF sweep

Stimulate across the band, capture the spectrum and check gain and spurs.

> Sweep the receiver from 2 to 4 GHz and check gain flatness within 1 dB.

03

Hold-up and brown-out

Drop and restore the input, capture the output, and time the hold-up.

> Measure hold-up time at full load after a 50 ms input dropout.

Why m8rix

Built for hardware that has to work

Limits it cannot cross

Your device's ratings are hard limits, checked on every step by deterministic code. The AI can't loosen them.

Every run on the record

Every command, who asked for it and the result, with the data and waveforms kept for review.

Your data stays on your machines

The app and your lab data run locally; only the AI request goes out, to the provider you choose.

On this bench

  • Power supplies335
  • Signal generators97
  • Spectrum analyzers23
  • Network analyzers21
  • Oscilloscopes171
  • and anything else with SCPI