Solutions · Energy
Test power conversion for solar and storage
Solar inverters, MPPT controllers and battery storage systems are tested across many operating points. m8rix runs those points for you, with PV and battery simulators on the bench.
What you can validate
m8rix for energy
- MPPT trackingPV simulators follow irradiance profiles while the tracker's efficiency is measured.
- Inverter efficiency and qualityEfficiency across load and input, with output waveforms captured and measured.
- Battery storageCharge and discharge cycles, protection thresholds and state-of-charge behaviour.
- Long-duration runsProfiles that run for hours or days, queued and logged unattended.
Workflows
Say what to test. It runs the rest.
Each workflow starts with a sentence. The agent turns it into a plan you review, then runs it on your bench.
01
MPPT profile
A day's irradiance profile on the PV simulator, tracking efficiency logged throughout.
> Run a cloudy-day irradiance profile and report MPPT tracking efficiency.
02
Efficiency curve
Efficiency at every load step, at three input voltages.
> Measure inverter efficiency from 10 % to 100 % load at three DC input voltages.
03
Cycle test
Charge and discharge cycles with the battery simulator, capacity and efficiency per cycle.
> Run fifty charge-discharge cycles and log round-trip efficiency.
Why m8rix
Built for hardware that has to work
Limits it cannot cross
Your device's ratings are hard limits, checked on every step by deterministic code. The AI can't loosen them.
Every run on the record
Every command, who asked for it and the result, with the data and waveforms kept for review.
Runs while you're away
Long profiles run overnight and over weekends, and every output goes off when they end.
On this bench
- Battery and PV simulators11
- Power supplies335
- Electronic loads11
- Power analyzers and DAQ3
- Oscilloscopes171
- and anything else with SCPI
Other solutions
See it run on your own bench
Free for Mac and Windows. Start on a simulated bench, then connect your instruments.